Contents:1-Inflatible 32" X 21", padded,infant tub, elephant and hippo design.
To Inflate
For best results, inflate by mouth or low pressure pump. Do not use a high pressure hose or compressor. Do not over-inflate. Snug-Tub features four valves , two on the underside of the unit, and two on the side walls. Each valve will inflate a separate compartment of the Snug-Tub. Do not use the snug tub unless all four compartments have been inflated accordingly to the following instructions.
Begin by inflating the two floor compartments of the Snug-Tub.
Find the two valves on the underside of the unit.
Blow into one of the valves, while squeezing the base of the valve slightly to release the inside safety stem. The inside safety stem prevents the air from escaping back through the valve.
Do not try to remove every last wrinkle from the Snug-Tub, as this will cause over-inflation.
Once inflated , press valve into the stem, so that the valve is flat with the surface of the Snug-Tub.
Repeat procedures 3-5 for the other valve on the underside of the Snug-Tub. The floor compartments should now be inflated.
Next, find the two valves on the side walls of the Snug-Tub. Follow procedures 3-above for each valve, until both side walls are fully inflated.
CAUTION:
Always test the water temperature by hand before placing child in the water. Never place a child in water that is too hot. Water should be warm and pleasant to the to
